

Final Touch
Mobile terminal with a built-in printer
The whole counter, carried to the table.
$498.59In stock
Pay over time with
Get the highlights.
The terminal, and the parts that keep it on the floor through a shift.
A quad-core processor, running at 1.3 gigahertz.
ARM Cortex-A7 — a 32-bit RISC design, four cores of it, clocked at 1.3 GHz.
| Processor | ARM Cortex-A7 |
|---|---|
| Clock | 1.3 GHz |
| Memory | 16GB flash & 2GB RAM |
Capabilities
More than a card reader.
One device, not four
Payments and the apps beside them — a register, stock, an order history — on the same screen, so the counter is wherever the device is.
It prints where it stands
A 40mm roll under the lid. The receipt is handed over at the table, on the floor or at the door, without a walk back to the till.
Quad-core, 1.3 gigahertz
An ARM Cortex-A7 running Android 9 or 10 — the till, the card and the printer at once, without the queue noticing.
A camera, and a scanner if you need one
A rear camera for the codes a phone shows you, and an optional barcode scanner for stock that carries a label.
One device, four jobs.

The roof reads the card
Contactless payments at 13.56 MHz — the band a card or a phone taps on.
Paper comes off the top
An integrated printer behind the lid: 57mm-wide paper on a 40mm roll, at up to 100mm a second. The receipt leaves at the same edge the card was tapped on.
A 5.5" screen, held in one hand
1280 by 720, capacitive — large enough to show the amount at arm's length across a table, and to be the thing a customer reads rather than something the staff member has to turn round and narrate.
Chip and stripe as well
A card that is not tapped is still taken: the terminal reads chip cards and magnetic stripes, so nothing has to be handed back.

A mobile terminal stops being mobile the moment it needs a wall. Final Touch is built to run a whole trading day on one charge — a stall from setup to teardown, a dining room through two sittings, a hatch that opens before the queue does and stays open after it thins.
And when the day runs long, the spare clips out by hand. No screwdriver, no cable, no waiting for the till to come back.
Adyen S1F2 tech specs
- Device dimensions
- 200 mm L x 78 mm W x 56 mm H / 7.9" L x 3.1" W x 2.2" H
- Printer Availability
- Yes
- User interface
- 5.5" Touch display
- Paper roll size
- 40mm
- Speaker & audio jack
- Audio speaker, audio jack
- Power Supply (PSU)
- Included
- Weight
- 495g / 1.09 lbs
- Battery
- 5840mAh (21.3Wh), replaceable
- Processor
- Quad-core, 1.3 GHz, ARM Cortex-A7 32-bit RISC processor
- Memory
- 16GB flash & 2GB RAM
- Operating System
- Android 9.0 and Android 10
- Camera / Barcode scanner
- Camera & optional barcode scanner
- PCI Validity
- PCI PTS 6
- Point-to-Point Encryption (P2PE)
- Available starting firmware version 1.117
Cart
Your cart is empty












